High Teck™ 7330-4 2K High Solids Urethane Primer, 1 qt, Gray, 3.43 lb/gal VOC, 4:1 Mixing
Direct-To-Metal 2K high solids urethane primer can be used as a spray filler, high build primer or as a wet-on-wet non-sanding sealer. It is tintable, fast drying, easy sanding and fills quickly. It can be applied to bare metal, fiberglass, unsanded e-coat and to bumpers without a flex agent.
- DTM 2K urethane primer/surfacer/sealer
- High solids, tintable formula sands easily
- Fast drying (45 min to sand)
- Apply to bare metal, unsanded e-coat and bumpers without a flex agent
- Use as a super high build primer, primer surfacer or wet-on-wet/no
- 1-1/2 hr at 68 deg F (20 deg C) pot life
WARNING: WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov This product and associated products may contain chemicals known to the State of California to cause cancer or other reproductive harm.
FIND A DISTRIBUTOR
- Documentation
- SPECS
- Review
Support Documents
No Record
Write Your Own Review